Interface Codes
hex1.jpg

WINTER 2006

Newsletter  PDF

  
  TOP                        PAGE 2                        PAGE 3                  
 ChekVolt™         24/7 Voltmeter  USB Flash Drive        ProfiBus  Inside-Outlet®  
A SAFETY INNOVATION
Closed Door Voltage Check Reduces Arc Flash Risk
ChekVolt™ Thru-Door Voltage Portal
 
hex8.jpg
Reduce Arc Flash Risk  Seeing voltage from behind closed doors with ChekVolt™ non contact voltage detector interface.
Thru-Door Voltage Portal
ChekVolt™ reduces arc flash risks and increases electrical safety with Thru Door Voltage Pre-verification. ChekVolt™ installs into a grounded metallic electrical enclosure and allows maintenance people to use a non-contact voltage detector 'pen' to check line voltage before they access the inside of the enclosure.  Pre-verifing electrical isolation reduces arc flash risk and puts an additional safety measure between electricians and the hazardous voltage.  

ChekVolt™ extends the line voltage from the main disconnect (or other voltage source) through a wire into an encapsulated non-metallic assembly fastened to the enclosure exterior. The ChekVolt™ R-1A installs into a 1/2” (13mm) drilled hole.
This Issue:
12MB rated ProfiBus Network Tap
ChekVolt Thru-Panel Voltage Portal
RoHS Compliance
Inside-Outlet Thru-wiring
USB Memory Stick Interface
Electrical Safety Tip: Voltage Indicator/Voltmeter Comparsion
Integral 6’ Lead Wire
Installs in a ½” Hole
Legend Plates with Power Graphic
Rugged Polycarbonate Construction
UV Outdoor Rated
Cost less than $15 per point
hex20.jpg
hex21.jpg
Graphic Legend Plates for all Power Systems. Shown: 3-Phase WYE Part #: R-LPJ (6” X 3.6”)
Quantity (3) ChekVolt R-1A wired to the LOAD side of a fusable disconnect
hex24.jpg
Voltage Rating: 600V
Temperature Rating: -20 to 60°C
Material: UV Rated Polycarbonate
Flame Rating: V-0
5001 Tremont Ave. Davenport IA  52807 (563) 386-9596 Fax: (563) 386-9639 anitah@grace-eng.com www.grace-eng.com
UL Listed Device (pending)
UL Type 4X and 12 Rating (pending)
hex29.jpg
RoHS
  TOP                        PAGE 2                        PAGE 3                      
 ChekVolt™         24/7 Voltmeter  USB Flash Drive        ProfiBus  Inside-Outlet®  
hex30.jpg
hex31.jpg Voltmeter and Voltage Indicator Comparison
A voltmeter and voltage indicator each have different yet similar functions, but still belong on the same ‘electrical safety’ team.  Let’s compare and contrast both devices with the goal of understanding how each device can be used for maximum safety.
hex32.jpg
hex33.jpg
is permanently mounted and less susceptible to damage.
has built-in reliability due to redundant circuitry, surge immunity, long life LEDs and heavy duty construction.
has but one function- indicating voltage.
gets it’s power from the line (hazardous) voltage, not from an external power source.
is hardwired with pigtail leads which ensures a reliable connection.
works well within a mechanical Lock-out/Tag-out procedure.
requires no fusing and easily installs in a 30mm hole.
USB Flash Drive Interface:
hex38.jpg
Thru-Door Portable Memory Solutions

Interface Code: P50
GracePort®, VoltageVision®, and Inside Outlet® is a registered trademark of Grace Engineered Products, Inc.
Copyright 2006 Grace Engineered Products, Inc.
  TOP                        PAGE 2                        PAGE 3                  
 ChekVolt™         24/7 Voltmeter  USB Flash Drive        ProfiBus  Inside-Outlet®  
hex41.jpg
Safely
Test & Reset
GFCI’s from Outside your
Panel
 
One
Receptacle
Inside & Outside!
 
Standard
on GracePorts®
with GFCI’s
  Reduced Panel Space & Thru-Door Convenience in One Device
With built-in feed through wiring the Inside-Outlet® can feed ‘GFCI Protected’ power to multiple receptacles wired off the LOAD terminals (Note 2).
hex55.jpg
 
RoHS Compliance If you need a RoHS compliant GracePort®, please specify it on
your order. Our inventory allows us ability to provide customers with virtually any RoHS compliant GracePort® combination.  Major components (housings, back plates, faceplate, etc.) are RoHS compliant. RoHS compliant common GracePorts®, should pose us no problem. Less common combinations may require us to use slightly different RoHS components that provide the same “form-fit-function”.
Integral network balance inductors for transfer rates up to 12MB.
Easy wiring with pull-apart terminal blocks.
End-of-network switch 5VDC & COM terminations points for  tap.
RoHs Compliant
hex56.jpg
Profi-Bus
Network Tap
ProfiBus Network Solutions.

Interface Code: D3
RoHS
P-D3-M3RF0
NEMA 12/4 ProfiBus Network Tap with an Inside-Outlet® GFCI Convenience Receptacle (Standard on all GracePorts® with GFCI’s).
hex58.jpg
Changing the way you think and act around hazardous voltages