Interface Codes

 

 

5000 Tremont Ave Suite 203

Davenport, IA 52807

(563)-386-9596 Fax (563)-386-9639
http://www.grace-eng.com

              

Download 300dpi                        300 DPI R-3W Image          Link to R-3W DataSheet

VoltageVision image

                  

R-3W Combination                   R-3W Typical Schematic

Starter 300 DPI Image                300 DPI Image

For Immediate Release

Simple Device, Huge Electrical Safety Value

VoltageVision™ Power Warning Alert

Increase Safety, Reduce Arc Flash Risk

 [Davenport, IA: June 21, 2005] –“Is there voltage?” – Creating an “electrically safe work condition” is critical for electricians performing maintenance on de-energized systems.  The VoltageVision™ (Part #: R-3W) Power Warning Alert is mounted to the panel exterior and hardwired into the load side of the main disconnect, thereby providing external LED indication of voltage inside electrical system enclosures.  The R-3W is easy to install and apply, low cost ($109), and its inherent reliability provide electrical maintenance with immense safety value.

“The VoltageVisionä R-3W is elegantly simple, yet has huge implications for the electrical safety community.  The electrical safety value of this device is immense.” Philip Allen, President, Grace Engineered Products.

Voltage is the single determining factor if an electrical accident or an arc flash is possible--No voltage means: No accident, No arc flash.  After disconnecting power to an enclosure, electricians can “see” the internal voltage state while the enclosure is safely closedVoltageVisionä provides “ON/OFF” voltage indication, thereby “pre-verifying” that an “electrically safe work condition” exists before opening the electrical enclosure.  VoltageVisionä is like a “hard wired voltmeter” without a power supply because it is powered from the same “voltage” that it indicates.  This device also reduces the risk of arc flash because the electrician will know the power state inside the enclosure, before verifying isolation with a meter.  VoltageVisionä’s superior redundant design exceeds the surge requirements for a Category III certified voltmeter.  The VoltageVisionä R-3W is an additional safety measure between maintenance personnel and hazardous voltage.

The VoltageVisionä R-3W is “one-size-fits-all” because it detects both AC & DC voltage and operates from 40-750VAC/30-1000VDC.  The encapsulated construction, redundant circuit design, and long life LED's provide superior reliability.  The R-3W is C-UL-US Nema 4X listed, and fits into a standard 30mm pushbutton hole.

For a White Paper on this subject: VOLTAGE WARNING INDICATORS-ELECTRICAL SAFETY ISSUES

Grace Engineered Products manufactures the GracePortÒ line of convenience interfaces.  GracePortsÒ extend the data ports of internally mounted devices from the inside, to the outside of control panels.  Grace provides over 6000 different combinations of cables, connectors, and outlets in NEMA 1/12/4/4X, stainless steel, and Nema 7/9 housings. All ports are clearly marked as to their function. Orders are processed in any quantities with a typical 3-5 day delivery.

####

Media Contact:

Troy Ryner

troyr@grace-eng.com

Grace Engineered Products, Inc.

1-800-280-9517

5000 Tremont Ave Ste 203, Davenport, IA, 52807

www.grace-eng.com

 

Editors:  Download Photos at   VoltageVisionR-3W_200506.shtm