The NEW Control Panel Utility Outlet!
Low cost and easily installed in a 30mm pushbutton hole. Redundant circuit design for long term reliability.
Electrical
Safety
Innovation
Issue
ThruView Housings
VoltageVision
Power Warning Alert
“See” Live Voltage
Simple Installation
H-Series Housings
See-Thru Housings
Din Cutouts
Nema 12/4 & 4X Rated
A GFCI checks that the outgoing current flow(L1) is equal the the incoming current(N). A dfference between current IN and current OUT, means that the ‘extra’ current is flowing to ground. This is an electricial hazard or a ground fault. A UL Listed Type A GFCI will trip between 4.5-6.0mA current difference.
NFPA 79: GFCI’s....The Control Panel Utility Outlet Standard:(1)
5000 Tremont Ave., Suite 203
Davenport IA 52807
(563) 386-9596
Fax: (563) 386-9639
anitah@grace-eng.com
www.grace-eng.com
GracePort® and ExInPlex® are registered trademarks of Grace Engineered Products, Inc
Copyright 2005 Grace Engineered Products, Inc.
Voltage is the single determining factor if an electrical accident or an arc flash is possible--No voltage means: No accident, No arc flash. After disconnecting power to an enclosure, electricians can "pre-verify" voltage while the enclosure is safely closed. The risk of arc flash will be reduced because electricians know if there is power inside the enclosure, before re-verifying isolation with a meter.
Unmatched Reliability due to dual redundant circuitry and no separate power supply. The R-3W is powered from the same “voltage” that it indicates.
More Information:
www.grace-eng.com/whitepaper
Redundant Circuitry
40-750VAC, 30-1000VDC
Potted Construction with 6’ Leads
Phase Insensitive
30mm Size
High Surge Immunity
UL Type 4X Listed
Warning Nameplate (3” by 2.3”).
See voltage sources inside your panel with our DIN rail bracket.
Circuit Breaker Disconnects-Invisible blades.
High Energy Panels (NFPA 70E Category III & IV).
Frequently Accessed Panels.
Mechanical Lock-Out Tag-Out: Indicating Zero Energy.
Panels with Multiple Power Sources.
Fits a standard pushbutton enclosure
Warning plate flange for 1½” NPT conduit. Die-cast AL with female threads.
Door mount kit for additional voltage protection. Includes a 30mm adapter and 6’ of NW10
We will efficiently build the ‘one-of-a-kind’ interface that you need with no set-up charge and the fastest delivery in the industry. Most orders ship the next day!
