Standard Configuration (Fig. 2):
GracePort® data switches come configured with the “I/O” port on the front (panel exterior) and the “A” and “B” ports inside the enclosure.
Wiring Exception Code W2 (Fig. 1)
The W2 exception code specifies that Port” A” is installed on the exterior, while “I/O” and “B” is installed on the interior. This is only applicable for 2:1 data switches.
Note: This application allows you to program ONLY DEVICE #2 through Port A of the Data Switch. (DEVICE #1 may have a secondary programming port). If DEVICE#1 has only one port (RUN/PROG), then reference the GracePort® R49 Crossover Switches.
Custom Text:
Add a “-T” on the end of the part number and specify front and rear text with your order
